Document name UCP/EMG80 – Account Codes Author  Anita Robson Publish Date 09/10/2018 Version  1.0

 

 

1. Version Information 

 

 

Date Author Update Information  Version 09/10/2018 Anita Robson 1st draft 1.0

 

 

2. Document Purpose & History

 

This document is intended to provide the reader with the necessary steps to programme account codes.

 

 

 

 

UCP/eMG80 – Account codes

 

You may allow tracking of specific calls by entering a non-verified variable length (up to 12 digits) identifier for a call.  The identifier or “Account Code” is output as part of the Station Message Detail Record (SMDR) for the call.  This is often used to allocate call costs to a specific account or client.

 

To Assign a flex key for Account Code Operation:

 

 [TRANS/PGM] + {FLEX} + [TRANS/PGM] + “84” + [HOLD/SAVE]

 

To assign a Flex button for {ONE-TOUCH ACCOUNT CODE} operation:

 

[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “84” + Account code (up to 12 digits) + [HOLD/SAVE]

 

LIP/LDP handset

 

To enter an account code prior to making a call:

 

  1. Lift the handset or press the [SPEAKER] button.
  2. Press the {ACCOUNT CODE} button.
  3. Dial the Account Code (up to 12 digits).
  4. Press “*”, Intercom dial tone is heard.
  5. Place the outside call as normal.

Or,

  1. Lift the handset or press the [SPEAKER] button.
  2. Press the {ONE-TOUCH ACCOUNT CODE} button.
  3. Place the outside call as normal.

 

SLT

 

To enter an account code prior to making a call:

  1. Lift the handset.
  2. Dial the Flex Numbering Plan code “550”.
  3. Dial the Account Code (up to 12 digits).
  4. Press “*”
  5. Place the outside call as normal.

 

To enter an account code during a call:

  1. Momentarily press the Hook-switch.
  2. Dial the Flex Numbering Plan code “550”.
  3. Dial the Account Code (up to 12 digits).
  4. Press “*”
 

 

 

“