Document name Outgoing CLI Author  Anita Robson Publish Date 16/08/2018 Version  1.0

 

 

1. Version Information 

 

 

Date Author Update Information  Version 16/08/2018 Anita Robson 1st draft 1.0

 

 

2. Document Purpose & History

 

This document is intended to provide the reader with the required information for sending outgoing CLI on an iPECS UCP or EMG80 System

 

Outgoing CLI

 

You can choose on the system which CLI you want to present on outgoing calls, this can be different per user or you can just send your main number for everyone.

 

PGM140

 

Enter your line range and press load

 

 

Set your CO type to DID

 

 

PGM145

 

Set to Modify using flexible DID conversion table

 

Enter your line range and press load

 

 

 

PGM231

 

Flexible DDI routing – Programme your DDI routing as normal

 

PGM151

 

Enter your line range and press load

 

 

Set:

 

CLIP Table Index – STATION CLI

Type of Number for Calling Party info – NATIONAL

Incoming Prefix Code Insertion – ON

Outgoing Prefix Code insertion – OFF

My Area Prefix Code – 0

 

PGM113

 

Enter your station range and press load

 

 

 

Set:

 

Station or Attendant to – STATION or ATD (depending on what CLI you wish to send)

Station CLI 1 to – CLI NUMBER (without leading 0)

 

If you are using SIP trunks, you also need to set:

 

PGM133

 

Enter your line range and press load

 

 

 

Set:

 

Remote Party ID to – USE

 

 

 

 

Set:

 

From ID to – EXTENSIN OUTGOING CLI

Remote Party ID to – EXTENSION OUTGOING CLI

 

 

 

 

“