iPECS UCP/eMG80 – MSN Keys to send specific CLI

1. Version Information 

2. Document Purpose & History

This document is intended to provide the reader with the required steps for setting up MSN keys to send specific CLI on the iPECS UCP & eMG80.

iPECS UCP/eMG80 – MSN Keys to send specific CLI

Example:

Our ISDN2 MSN Numbers are:

01444 480900, 911, 915 & 914 (Pilot number is 480900)

(We receive 6 digits from the network)

Objective:

1)      To send OG CLI of 01444 480911 when dialing 9 from a specific keyset.

2)      To Send OG CLI of 01444 480914 when a call is made using Flex23 MSN Loop Key for 480914

3)      To send OG CLI of 01444 480915 when a call is made using Flex24 MSN Loop key for 480915

4)      All other stations to send pilot number of 01444 480900 when dialing 9 or using a normal loop key.

Configuration:

1)      Program the numbers you require to send from MSN Loop Keys in the MSN Table (PGM202)

I.e. 480914 & 480915 (as we receive 6 digits from the network)

The MSN table will also handle IC DDI calls in the normal manner by pointing to a Flex DDi Table (PGM231) index.

2)      Once you have these 2 numbers programmed in the MSN Table the system will allow you to set up MSN Loop Keys on the keyset for the same MSN numbers.

         In Station Flex Key Programming (PGM115/129) set the required flex key as a loop key and enter the MSN number in the Value Field. Ie.

         Flex Key 23 = Loop (MSN) 480914

         Flex Key 24 = Loop (MSN) 480915

3)      In the station CLI Attributes (PGM113), set the CLI Station Number as 480911.

 (This is the CLI that is sent if you just dial 9 for a CO)

4)      In PGM151 (CID/ CPN Attributes ) set:

         COLP = index 1

         CLIP  = index 1

         Type = National

         I/C Prefix = ON

         O/G Prefix = OFF

         My Area prefix Code = 0

5)     In PGM201 (CLIP/COLP Table)  set:

         Index 1 to 1444 (National number without leading 0 and last 6 digits stripped).

How to send different outgoing CLIs using MSN Loop Keys.

 (Continued)

Operation:

If you make a call by dialing 9 then 1444 (from pgm201 index1) + 480911 (from PGM113 CLI Sta. Nos.) is sent to line, the called party receives 01444 480911.

If the call is made using Flex 23 (Loop MSN480914) then 1444 (from pgm201 index1) + 480914 (from Loop MSN Key) is sent to line, the called party receives 01444 480914.

If the call is made using Flex 24 (Loop MSN480915) then 1444 (from pgm201 index1) + 480915 (from Loop MSN Key) is sent to line, the called party receives 01444 480915

If the call is made from any other  station without MSN Loop Keys or a valid entry in PGM113 CLI Station Number then the network will send the pilot number of 01444 480900.

As the default entry in PGM113 (CLI Sta. Nos.) is sent to line i.e. 1444+108 for station 108.

As this is not a valid number for the ISDN2, the network will revert to the pilot number of 01444 480900.

NB: To program up a MSN Flex key go to PGM 115.

Set the key to be a Loop and place the value as the CLI i.e. 480915.

“