Document Name iPECS UCP/eMG80 – Call Park Author  Andrew Cleveland Publish Date 29/04/2016 Version 1.1 Reference  8123242

 

1. Version Information 

 

Date Author  Update Information Version 29/04/2016 Andrew Cleveland 1st Draft 1.0 29/01/2018 Jack Deegan 2nd Draft  1.1 01/06/2020 Andy Aston    
 

2. Document Purpose & History

 

This document is intended to provide the reader with an overview of the call parking featuring on the iPECS UCP & eMG80.

 

iPECS UCP/eMG80 – Call Park

 

You may place an active outside call in a special holding location called a Park Orbit for easy access from any station in the system. There are 200Park Orbits allowing multiple calls to be parked simultaneously.
 
Operation
iPECS IP & LDP Phones
1. Press the [TRANS/PGM] button.
To park an active external call
2. Dial the Park Orbit number (#601~#800).
3. Return to idle.
1. Lift the handset or press the [SPEAKER] button,
To retrieve a parked call
2. Dial the Park Orbit number (#601~#800).
 
SLT
1. Momentarily press the hook-switch, R or Recall button
To park an active external call
2. Dial the Park Orbit number (#601~#800).
3. Return to idle.
1. Lift the handset.
To retrieve a parked call
2. Dial the Park Orbit number (#601~#800).
 
Conditions
1. If the selected Park Orbit returns a busy signal, the user may simply dial another Park Orbit without the need to disconnect.
2. Intercom calls cannot be placed in a Park Orbit.
3. A Parked call will recall to the station that parked the call should the Call Park Timer expire. The normal Hold Recall process is then initiated.
4. A Parked call will indicate busy at all appearances.
 
Programming
SYSTEM DATA
System Timers Call Park Recall Timer
Related Features
 Hold Recall
 Attendant Recall

 

 

“